Plug Adapter 14 mm to 10 mm Brass Spark  for CM6 / Y82 Spark Plugs

Plug Adapter 14 mm to 10 mm Brass Spark for CM6 / Y82 Spark Plugs

Plug Adapter 14 mm to 1/4-32 mm Brass Spark  for 1/4-32 Spark Plugs

Plug Adapter 14 mm to 1/4-32 mm Brass Spark for 1/4-32 Spark Plugs

Plug Adapter 10 mm to 1/4-32 mm for 1/4-32 Spark Plugs

This Adapter allows you change the 10 x 1 mm threads to 1/4-32 threads (same as GLOW Plugs threads) and use NGK-ME8, RCexl 1/4-32 or RimFire VR2 Spark Plugs. This will give you a lower profile engine and fit better under the Cowling.

$11.00
In stock
Only 21 left
SKU
SPKAD-10/14-32
This Adapter allows you change the 10 x 1 mm threads to 1/4-32 threads (same as GLOW Plugs threads) and use NGK-ME8, RCexl 1/4-32 or RimFire VR2 Spark Plugs. This will give you a lower profile engine and fit better under the Cowling.

The Adapter is made from STEEL and offers  better strength than the brass that break off easier.Please keep in mind that even tho is Steel please tight with care the material is still thin and can break off.

Use some HI TEMP Thread lock of JB Weld when you insert them .

In case of breaking use an easy-out to take it OFF.

STILL TIGHTEN WITH CARE !!!!

 

Write Your Own Review
You're reviewing:Plug Adapter 10 mm to 1/4-32 mm for 1/4-32 Spark Plugs