3/4

3/4" / 19 mm HEX Spark Plugs Repair KIT, for NGK, Bosch

Saito FA 220, GLOW CH Ignitions CDI Conversion

Hi Quality CH  Hardware to convert your engine to GLOW CDI

 

SAIE220, SAIE220GK,

Saito FA 220, Saito FA22oGK

$135.00
In stock
Only 10 left
SKU
SAIFA220-GLOW

Hi Quality CH  Hardware to convert your engine to GLOW CDI .

 

SAIE220, SAIE220GK,

Saito FA 220, Saito FA22oGK

This conversion is one of the best option if you want to 'RUN AWAY"from Glow Fuel.
By adding the CH CDI & CH hardware you will have a close to perfect solution, less
expensive since you on ready have the engine instead of  buying a new one.
The CDI provides a better starting, better Idle and one of the best features is the
fuel economy.
Running on GASOLINE I seen 2.5 to 3 minutes on 1 Oz fuel mix 20:1 Synthetic OIL
Fuel will not be gashing out like on GLOW Plug, your airplane will be cleaner and
close to NO  wiping after a fun day at the field.

Engine will run hotter, ensure proper air flow for cooling .
Use 20:1 Fuel Mix (50 ml oil to 1 L gasoline ),
I use Morgan OIL CP14 , also Evolution Oil, Royal Purple 2 ST.

Power loss is 10% but still enough power . If you are border line on power then consider the other conversion...GLOW CH CDI Conversion

A timing kit is also available, check in related products or under Timing Kit
Check the Install Manual on the "Manual"   Tab

Included Hardware:

  • 1 x CH CDI Made in the USA
  • 1 x Magnet adjustable ring
  • 1 x Sensor holder with sensor
  • 1 x 1/4-32 Spark Plug   ( same thread as your glow plug)
  • 2 x M3 x 12 mm cap screws
  • 3 x M3 x 18 mm  cap screw
  • 1 x Intake Heat Insulator/Spacer
  • 1 x Carburetor Support
  • 1 x Gasoline Home& Garden Style Carburetor  ( Walboro/Zama/HLIC (whatever works and available)
  • 1 x Throttle linkage

Step 1 : Pull the Prop Drive and install the magnet ring

sai fa220 ring install_1_1

Step 2: Remove the 2 original screws from the cam cover, install CH sensor holder and fasten back with the 2 cap screws .

sai fa220 sensor install_1_1

 

Full Install

 

sai fa220 ring install sensor install_1_1

 

 

For more details on timing please watch video below If you still have questions, Please do not hesitate to call me, as a CH customer…you are a phone call away !

HOW TO TIME AN ENGINE 2 ST or 4 ST

 Please download, watch online or print out for your convenience.

CH Timing Procedure

CH Universal Timing Device

Write Your Own Review
You're reviewing:Saito FA 220, GLOW CH Ignitions CDI Conversion